This specification defines the materials and design criteria of a complete bottom rolling door system as manufactured by WELL BILT Industries of Williston, Florida.
Materials
All materials used for the construction of rolling door system components shall be new and free from any defects or imperfections which could affect serviceability.
Project Name: Private Hangar Ocala International Airport (OCF) / Ocala, FL
Project Specs: (1) Rolling Door System
(2) O.D. Hercul-Eze® Operators ***RETRO FIT***
Framing
The basic outer frame shall be constructed of hot rolled or cold formed structural steel shapes or in the case of relatively small door sections, welded mechanical tubing.
Project Name: TxAeroSport Aerodrome / Dorchester, TX
Project Specs: (2) 60'- 0" x 17'- 6" Rolling Door Systems
(1) 80'- 0" x 17'- 6" Rolling Door System
Bottom roller and track system
All bottom rollers used by WELL BILT Industries are equipped with re-lubeable anti-friction bearings. Smaller, light weight doors are supplied with vee groove rollers with caged needle anti-friction bearings for use with inverted angle track systems. Larger doors are furnished with tapered roller bearing bottom rollers designed to be used with rail track systems. All bottom roller systems are serviceable without removing the door section from the track.
Top guide system
WELL BILT Industries offers both fixed and telescoping top guide systems. The fixed top guide system can accommodate a maximum total vertical deflection of three inches. The telescoping top guide system is used where total building vertical deflection is greater than three inches or where positive engagement of the top guide is required because of wind uplift conditions. Both systems utilize sealed ball bearings for guide and carrier rollers. The fixed top guide system engages a structural angle guide beam and the telescoping top guide system engages an "I" or wide flange beam. Either are furnished by WELL BILT Industries and are to be installed by others. Lateral supports for the top guide beams are to be supplied by others and are to be spaced 8' to 10' apart.
Pick up bars
WELL BILT Industries provides pick up bars to be welded or bolted to the leading and trailing edges of the door sections of a power operated door system. These bars permit multiple sections to be opened or closed by one operator.
Weather Seals
WELL BILT Industries shall provide EPDM style 40 black rubber and galvanized retainer strips for bottom and side of each rolling door section.
Protective Finish
Standard finish on WELL BILT Industries doors is a low voc gray oxide primer. This provides short term protection of the metal surfaces until the door is installed and can be painted with a finish coat of paint. Red primer can be provided by request. An optional charcoal gray metallic industrial enamel finish paint is available.
Rolling Door Operators
WELL BILT Industries offers a patented rolling door operator adaptable to either in-the door or out-of-door installation. Most WELL BILT Industries rolling door systems can be furnished with or retrofitted with operators.
Personnel Doors
The standard personnel door supplied by WELL BILT Industries is a 3078 size aluminum framed, hollow core door (30' x 78'). Other sizes are available on special order. An electrical interlock can be provided to prevent the door from being operated unless the personnel door is securely closed. Passage lock sets and wind chains are included. WELL BILT Industries also offers wind load rated personnel (36' x 80'), as well as framed openings for personnel doors provided by others (sized per customer specifications).
Lock sets with dead bolts are available as well as master keyed lock sets for multiple door installations.
Project Name: Naval Air Station / Patuxent River, MD
Project Specs: (3) 160'-0" x 40'-0"
(1) 160'-0" x 40'-0"
(8) Hercul-Eze® 500-SW Direct Drive Operators
**RETRO FIT***
Information and Documentation
WELL BILT Industries provides drawings, cut sheets and instructions adequate for the preparation of the job site and the assembly and installation of the rolling door system.
Compliance
WELL BILT Industries doors are constructed to comply with all codes and specifications provided at the time an order is initiated. Wind load compliance certification by a professional engineer licensed to practice in the state of Florida is available if required. WELL BILT Industries is a Miami-Dade County Approved Hangar Door Manufacturer and has been issued a Certificate of Competency.
Warranty
WELL BILT Industries rolling door systems are warranted for one year from the date of purchase against defects in material and workmanship. Refer to WELL BILT Industries for specific details.
Owners Manual
WELL BILT Industries will provide each customer with an "Owner's Manual" which details the specifics pertaining to their custom door system.
PrivateSky Aviation
Ft. Myers, Florida
Project Specs:
(1) 158' x 28' Rolling Door System
(2) WELL BILT Hercul-Eze® Operators
Marathon Flight Service
Kissimmee, Florida
Project Specs:
(1) 130'-0" x 27'-6" Rolling Door System